Handheld Guillotine
PTFE tube cutter with downloadable STL parts.
Go to files |  |
About this project
A PTFE tube cutter. Download the attached STL parts archive below.
Additional components to purchase
| Component | Quantity |
|---|---|
| Pin, D3 × 50 mm | 4 |
| M3 brass heat-set insert (D4.6 × L5.7) | 3 |
| M4 brass heat-set insert (D5.5 × L10) | 1 |
| Hex socket screw M3 × 8 mm | 1 |
| Hex socket screw M3 × 40 mm | 2 |
| Hex socket screw M4 × 40 mm | 1 |
| Compression spring, OD10 × L25 × WD0.7 | 2 |
| Trapezoidal blade, 19 mm × 61 mm × 0.6 mm | 1 |
License & attribution
© 2023, the 3Diwell team. This model is licensed under Creative Commons Attribution–NonCommercial 4.0 International (CC BY-NC 4.0).
A note from the 3Diwell team
We would appreciate it if you could take a moment to rate our projects. If you enjoyed them, it means we are more than just people with a printer — we are making things that actually work.
A five-star rating inspires us to explore new ideas and achieve more. And a review saves our team from melancholy after reprinting the same part for the 37th time.
With thanks and a calibrated extruder,
Your 3Diwell team, still believing in the power of reviews…
Rate our projects and leave a review
Support our projects
To support this project, visit its original project page (Russian).
Files
3D STL Parts.zip805 KBPlease check the project license and requirements before using these files.
Original project page RU ↗